The Joint Entrance Examination Advanced 2019 is going to be conducted by the IITs under the administration of the Joint Admission Board (JAB) 2019. On the basis of the candidate’s performance in the JEE Advanced exam, eligible candidates are provided admission to the Bachelor’s integrated Master’s and Dual Degree programs in various IITs. JEE Advanced exam consists of two papers – Paper 1 and Paper 2. For each paper, a candidate is given three hours. The schedule of JEE Advanced 2019 is provided below:
Official Schedule for JEE Advanced 2019
 Paper 1: 19^{th} May 2019 (Sunday) (09:00 to 12:00) Session 1
 Paper 2: 19^{th} May 2019 (Sunday) (09:00 to 12:00) Session 2
NOTE:
 Both papers are compulsory for candidates to attempt and will be held in computerbased test mode.
 The schedule of the examination is going to be same even if there is a public holiday on the day of examination.
JEE Advanced entrance examination is basically conducted to provide admission to candidates looking to pursue engineering courses from the various IITs of India. If you are also looking to seek admission to IITs, you will need to first clear JEE Main entrance exam and then clear JEE Advanced and several rounds of counselling.
As JEE Main (first attempt) has already been conducted on 8^{th} to 12^{th} January 2019, candidates who appeared for this exam and looking to go through the JEE Advanced will need to start preparing for it right away. When preparing for the exam, it is important to know about the syllabus. The syllabus for JEE Advanced is provided below.
JEE Advanced 2019 Syllabus
As JEE Advanced exam is mainly based on subjects such as Physics, Chemistry, Mathematics, following syllabus for the JEE Advanced 2019 exam is recommended.
Physics
General  Units and dimensions, dimensional analysis; least count, significant figures; Methods of measurement and error analysis for physical quantities pertaining to the following experiments: Experiments based on using Vernier calipers and screw gauge (micrometer), Determination of g using simple pendulum, Young’s modulus by Searle’s method, Specific heat of a liquid using calorimeter, focal length of a concave mirror and a convex lens using uv method, Speed of sound using resonance column, Verification of Ohm’s law using voltmeter and ammeter, and specific resistance of the material of a wire using meter bridge and post office box.

Mechanics  Kinematics in one and two dimensions (Cartesian coordinates only), projectiles; Uniform circular motion; Relative velocity. Newton’s laws of motion; Inertial and uniformly accelerated frames of reference; Static and dynamic friction; Kinetic and potential energy; Work and power; Conservation of linear momentum and mechanical energy. Systems of particles; Centre of mass and its motion; Impulse; Elastic and inelastic collisions. Law of gravitation; Gravitational potential and field; Acceleration due to gravity; Motion of planets and satellites in circular orbits; Escape velocity. Rigid body, moment of inertia, parallel and perpendicular axes theorems, moment of inertia of uniform bodies with simple geometrical shapes; Angular momentum; Torque; Conservation of angular momentum; Dynamics of rigid bodies with fixed axis of rotation; Rolling without slipping of rings, cylinders, and spheres; Equilibrium of rigid bodies; Collision of point masses with rigid bodies. Linear and angular simple harmonic motions. Hooke’s law, Young’s modulus. Pressure in a fluid; Pascal’s law; Buoyancy; Surface energy and surface tension, capillary rise; Viscosity (Poiseuille’s equation excluded), Stoke’s law; Terminal velocity, Streamline flow, equation of continuity, Bernoulli’s theorem and its applications. Wave motion (plane waves only), longitudinal and transverse waves, superposition of waves; Progressive and stationary waves; Vibration of strings and air columns; Resonance; Beats; Speed of sound in gases; Doppler effect (in sound).

Thermal Physics
 Thermal expansion of solids, liquids and gases; Calorimetry, latent heat; Heat conduction in one dimension; Elementary concepts of convection and radiation; Newton’s law of cooling; Ideal gas laws; Specific heats (Cv and Cp for monoatomic and diatomic gases); Isothermal and adiabatic processes, bulk modulus of gases; Equivalence of heat and work; First law of thermodynamics and its applications (only for ideal gases); Blackbody radiation: absorptive and emissive powers; Kirchhoff’s law; Wien’s displacement law, Stefan’s law.

Electricity and Magnetism  Coulomb’s law; Electric field and potential; Electrical potential energy of a system of point charges and of electrical dipoles in a uniform electrostatic field; Electric field lines; Flux of electric field; Gauss’s law and its application in simple cases, such as, to find field due to infinitely long straight wire, uniformly charged infinite plane sheet and uniformly charged thin spherical shell. Capacitance; Parallel plate capacitor with and without dielectrics; Capacitors in series and parallel; Energy stored in a capacitor. Electric current; Ohm’s law; Series and parallel arrangements of resistances and cells; Kirchhoff’s laws and simple applications; Heating effect of current. Biot–Savart’s law and Ampere’s law; Magnetic field near a currentcarrying straight wire, along the axis of a circular coil and inside a long straight solenoid; Force on a moving charge and on a currentcarrying wire in a uniform magnetic field. Magnetic moment of a current loop; Effect of a uniform magnetic field on a current loop; Moving coil galvanometer, voltmeter, ammeter and their conversions. Electromagnetic induction: Faraday’s law, Lenz’s law; Self and mutual inductance; RC, LR and LC circuits with d.c. and a.c. sources.

Optics  Rectilinear propagation of light; Reflection and refraction at plane and spherical surfaces; Total internal reflection; Deviation and dispersion of light by a prism; Thin lenses; Combinations of mirrors and thin lenses; Magnification. Wave nature of light: Huygen’s principle, interference limited to Young’s doubleslit experiment.

Modern Physics  Atomic nucleus; α, β and γ radiations; Law of radioactive decay; Decay constant; Halflife and mean life; Binding energy and its calculation; Fission and fusion processes; Energy calculation in these processes. Photoelectric effect; Bohr’s theory of hydrogenlike atoms; Characteristic and continuous Xrays, Moseley’s law; de Broglie wavelength of matter waves.

Chemistry
Organic Chemistry
General Topics  Concept of atoms and molecules; Dalton’s atomic theory; Mole concept; Chemical formulae; Balanced chemical equations; Calculations (based on mole concept) involving common oxidationreduction, neutralisation, and displacement reactions; Concentration in terms of mole fraction, molarity, molality, and normality.

Gaseous and liquid states  Absolute scale of temperature, ideal gas equation; Deviation from ideality, van der Waals equation; Kinetic theory of gases, average, root mean square and most probable velocities and their relation with temperature; Law of partial pressures; Vapour pressure; Diffusion of gases.

Atomic Structure and Chemical Bonding

Bohr model, spectrum of hydrogen atom, quantum numbers; Waveparticle duality, de Broglie hypothesis; Uncertainty principle; Qualitative quantum mechanical picture of hydrogen atom, shapes of s, p and d orbitals; Electronic configurations of elements (up to atomic number 36); Aufbau principle; Pauli’s exclusion principle and Hund’s rule; Orbital overlap and covalent bond; Hybridisation involving s, p and d orbitals only; Orbital energy diagrams for homonuclear diatomic species; Hydrogen bond; Polarity in molecules, dipole moment (qualitative aspects only); VSEPR model and shapes of molecules (linear, angular, triangular, square planar, pyramidal, square pyramidal, trigonal bipyramidal, tetrahedral and octahedral).

Energetics
 First law of thermodynamics; Internal energy, work, and heat, pressurevolume work; Enthalpy, Hess’s law; Heat of reaction, fusion and vapourization; Second law of thermodynamics; Entropy; Free energy; Criterion of spontaneity.

Chemical Equilibrium  Law of mass action; Equilibrium constant, Le Chatelier’s principle (effect of concentration, temperature, and pressure); Significance of ΔG and ΔG0 in chemical equilibrium; Solubility product, common ion effect, pH and buffer solutions; Acids and bases (Bronsted and Lewis concepts); Hydrolysis of salts.

Electrochemistry  Electrochemical cells and cell reactions; Standard electrode potentials; Nernst equation and its relation to ΔG; Electrochemical series, emf of galvanic cells; Faraday’s laws of electrolysis; Electrolytic conductance, specific, equivalent and molar conductivity, Kohlrausch’s law; Concentration cells.

Chemical Kinetics  Rates of chemical reactions; Order of reactions; Rate constant; First order reactions; Temperature dependence of rate constant (Arrhenius equation).

Solid State  Classification of solids, crystalline state, seven crystal systems (cell parameters a, b, c, α, β, γ), closepacked structure of solids (cubic), packing in fcc, bcc and hcp lattices; Nearest neighbours, ionic radii, simple ionic compounds, point defects.

Solutions  Raoult’s law; Molecular weight determination from lowering of vapour pressure, elevation of boiling point and depression of freezing point.

Surface Chemistry  Elementary concepts of adsorption (excluding adsorption isotherms); Colloids: types, methods of preparation and general properties; Elementary ideas of emulsions, surfactants and micelles (only definitions and examples).

Nuclear Chemistry  Radioactivity: isotopes and isobars; Properties of α, β and γ rays; Kinetics of radioactive decay (decay series excluded), carbon dating; Stability of nuclei with respect to protonneutron ratio; Brief discussion on fission and fusion reactions.

Inorganic Chemistry
Isolation/preparation and properties of the following nonmetals  Boron, silicon, nitrogen, phosphorus, oxygen, sulphur, and halogens; Properties of allotropes of carbon (only diamond and graphite), phosphorus and sulphur.

Preparation and Properties of Compounds  Oxides, peroxides, hydroxides, carbonates, bicarbonates, chlorides and sulphates of sodium, potassium, magnesium and calcium; Boron: diborane, boric acid and borax; Aluminium: alumina, aluminium chloride and alums; Carbon: oxides and oxyacid (carbonic acid); Silicon: silicones, silicates and silicon carbide; Nitrogen: oxides, oxyacids and ammonia; Phosphorus: oxides, oxyacids (phosphorus acid, phosphoric acid) and phosphine; Oxygen: ozone and hydrogen peroxide; Sulphur: hydrogen sulphide, oxides, sulphurous acid, sulphuric acid and sodium thiosulphate; Halogens: hydrohalic acids, oxides and oxyacids of chlorine, bleaching powder; Xenon fluorides.

Transition Elements  Definition, general characteristics, oxidation states, and their stabilities, colour (excluding the details of electronic transitions) and calculation of spinonly magnetic moment; Coordination compounds: nomenclature of mononuclear coordination compounds, cistrans and ionisation isomerisms, hybridization and geometries of mononuclear coordination compounds (linear, tetrahedral, square planar and octahedral).

Preparation and Properties of Compounds  Oxides and chlorides of tin and lead; Oxides, chlorides, and sulphates of Fe2+, Cu2+ and Zn2+; Potassium permanganate, potassium dichromate, silver oxide, silver nitrate, silver thiosulphate.

Ores and Minerals  Commonly occurring ores and minerals of iron, copper, tin, lead, magnesium, aluminium, zinc and silver.

Extractive Metallurgy  Chemical principles and reactions only (industrial details excluded); Carbon reduction method (iron and tin); Self reduction method (copper and lead); Electrolytic reduction method (magnesium and aluminium); Cyanide process (silver and gold).

Principles of Qualitative Analysis  Groups I to V (only Ag+, Hg2+, Cu2+, Pb2+, Bi3+, Fe3+, Cr3+, Al3+, Ca2+, Ba2+, Zn2+, Mn2+ and Mg2+); Nitrate, halides (excluding fluoride), sulphate and sulphide.

Organic Chemistry
Concepts  Hybridisation of carbon; σ and πbonds; Shapes of simple organic molecules; Structural and geometrical isomerism; Optical isomerism of compounds containing up to two asymmetric centres, (R,S and E,Z nomenclature excluded); IUPAC nomenclature of simple organic compounds (only hydrocarbons, monofunctional and bifunctional compounds); Conformations of ethane and butane (Newman projections); Resonance and hyperconjugation; Ketoenoltautomerism; Determination of empirical and molecular formulae of simple compounds (only combustion method); Hydrogen bonds: definition and their effects on physical properties of alcohols and carboxylic acids; Inductive and resonance effects on acidity and basicity of organic acids and bases; Polarity and inductive effects in alkyl halides; Reactive intermediates produced during homolytic and heterolytic bond cleavage; Formation, structure and stability of carbocations, carbanions and free radicals.

Preparation, Properties and Reactions of Alkanes  Homologous series, physical properties of alkanes (melting points, boiling points, and density); Combustion and halogenation of alkanes; Preparation of alkanes by Wurtz reaction and decarboxylation reactions.

Preparation, Properties and Reactions of Alkenes and Alkynes  Physical properties of alkenes and alkynes (boiling points, density and dipole moments); Acidity of alkynes; Acid catalysed hydration of alkenes and alkynes (excluding the stereochemistry of addition and elimination); Reactions of alkenes with KMnO4 and ozone; Reduction of alkenes and alkynes; Preparation of alkenes and alkynes by elimination reactions; Electrophilic addition reactions of alkenes with X2, HX, HOX and H2O (X=halogen); Addition reactions of alkynes; Metal acetylides.

Reactions of Benzene  Structure and aromaticity; Electrophilic substitution reactions: halogenation, nitration, sulphonation, FriedelCrafts alkylation, and acylation; Effect of o, m and pdirecting groups in monosubstituted benzenes.

Phenols  Acidity, electrophilic substitution reactions (halogenation, nitration, and sulphonation); ReimerTieman reaction, Kolbe reaction.

Characteristic Reactions of the alkenes and alkynes  Alkyl halides: rearrangement reactions of alkyl carbocation, Grignard reactions, nucleophilic substitution reactions; Alcohols: esterification, dehydration and oxidation, reaction with sodium, phosphorus halides, ZnCl2/concentrated HCl, conversion of alcohols into aldehydes and ketones; Ethers: Preparation by Williamson’s Synthesis; Aldehydes and Ketones: oxidation, reduction, oxime and hydrazone formation; aldol condensation, Perkin reaction; Cannizzaro reaction; haloform reaction and nucleophilic addition reactions (Grignard addition); Carboxylic acids: formation of esters, acid chlorides and amides, ester hydrolysis; Amines: basicity of substituted anilines and aliphatic amines, preparation from nitro compounds, reaction with nitrous acid, azo coupling reaction of diazonium salts of aromatic amines, Sandmeyer and related reactions of diazonium salts; carbylamine reaction; Haloarenes: nucleophilic aromatic substitution in haloarenes and substituted haloarenes (excluding Benzyne mechanism and Cine substitution).

Carbohydrates  Classification; mono and disaccharides (glucose and sucrose); Oxidation, reduction, glycoside formation and hydrolysis of sucrose.

Amino acids and peptides  General structure (only primary structure for peptides) and physical properties.

Properties and uses of Some Important Polymers  Natural rubber, cellulose, nylon, teflon and PVC

Practical Organic Chemistry  Detection of elements (N, S, halogens); Detection and identification of the following functional groups: hydroxyl (alcoholic and phenolic), carbonyl (aldehyde and ketone), carboxyl, amino, and nitro; Chemical methods of separation of monofunctional organic compounds from binary mixtures.

Mathematics
Algebra  Algebra of complex numbers, addition, multiplication, conjugation, polar representation, properties of modulus and principal argument, triangle inequality, cube roots of unity, geometric interpretations. Quadratic equations with real coefficients, relations between roots and coefficients, formation of quadratic equations with given roots, symmetric functions of roots. Arithmetic, geometric and harmonic progressions, arithmetic, geometric and harmonic means, sums of finite arithmetic and geometric progressions, infinite geometric series, sums of squares and cubes of the first n natural numbers. Logarithms and their properties. Permutations and combinations, binomial theorem for a positive integral index, properties of binomial coefficients.

Matrices  Matrices as a rectangular array of real numbers, equality of matrices, addition, multiplication by a scalar and product of matrices, transpose of a matrix, determinant of a square matrix of order up to three, inverse of a square matrix of order up to three, properties of these matrix operations, diagonal, symmetric and skewsymmetric matrices and their properties, solutions of simultaneous linear equations in two or three variables.

Probability  Addition and multiplication rules of probability, conditional probability, Bayes Theorem, independence of events, computation of probability of events using permutations and combinations.

Trigonometry  Trigonometric functions, their periodicity, and graphs, addition and subtraction formulae, formulae involving multiple and submultiple angles, general solution of trigonometric equations. Relations between sides and angles of a triangle, sine rule, cosine rule, halfangle formula and the area of a triangle, inverse trigonometric functions (principal value only).

Analytical Geometry  Two dimensions: Cartesian coordinates, distance between two points, section formulae, shift of origin. Equation of a straight line in various forms, angle between two lines, distance of a point from a line; Lines through the point of intersection of two given lines, equation of the bisector of the angle between two lines, concurrency of lines; Centroid, orthocentre, incentre and circumcentre of a triangle. Equation of a circle in various forms, equations of tangent, normal and chord. Parametric equations of a circle, intersection of a circle with a straight line or a circle, equation of a circle through the points of intersection of two circles and those of a circle and a straight line. Equations of a parabola, ellipse, and hyperbola in standard form, their foci, directrices and eccentricity, parametric equations, equations of tangent and normal. Locus problems. Three dimensions: Direction cosines and direction ratios, equation of a straight line in space, equation of a plane, distance of a point from a plane.

Differential Calculus  Real valued functions of a real variable, into, onto and onetoone functions, sum, difference, product and quotient of two functions, composite functions, absolute value, polynomial, rational, trigonometric, exponential and logarithmic functions. Limit and continuity of a function, limit and continuity of the sum, difference, product and quotient of two functions, L’Hospital rule of evaluation of limits of functions. Even and odd functions, inverse of a function, continuity of composite functions, intermediate value property of continuous functions. Derivative of a function, derivative of the sum, difference, product and quotient of two functions, chain rule, derivatives of polynomial, rational, trigonometric, inverse trigonometric, exponential and logarithmic functions. Derivatives of implicit functions, derivatives up to order two, geometrical interpretation of the derivative, tangents and normals, increasing and decreasing functions, maximum and minimum values of a function, Rolle’s theorem and Lagrange’s mean value theorem.

Integral calculus  Integration as the inverse process of differentiation, indefinite integrals of standard functions, definite integrals and their properties, fundamental theorem of integral calculus. Integration by parts, integration by the methods of substitution and partial fractions, application of definite integrals to the determination of areas involving simple curves. Formation of ordinary differential equations, solution of homogeneous differential equations, separation of variables method, linear first order differential equations.

Vectors  Addition of vectors, scalar multiplication, dot and cross products, scalar triple products and their geometrical interpretations

Architecture Aptitude Test
Freehand Drawing  This would comprise of simple drawing depicting the total object in its right form and proportion, surface texture, relative location and details of its component parts in appropriate scale. Common domestic or daytoday life usable objects like furniture, equipment, etc., from memory.

Geometrical Drawing  Exercises in geometrical drawing containing lines, angles, triangles, quadrilaterals, polygons, circles, etc. Study of plan (top view), elevation (front or side views) of simple solid objects like prisms, cones, cylinders, cubes, splayed surface holders, etc.

ThreeDimensional Perception  Understanding and appreciation of threedimensional forms with building elements, colour, volume and orientation. Visualization through structuring objects in memory.

Imagination and Aesthetic Sensitivity  Composition exercise with given elements. Context mapping. Creativity check through innovative uncommon test with familiar objects. Sense of colour grouping or application.

Architectural awareness  General interest and awareness of famous architectural creations – both national and international, places and personalities (architects, designers, etc.) in the related domain.

Now as you know about the JEE Advanced 2019 syllabus, you can prepare for the exam accordingly. However, as there is not much time left to the exam, it is important to plan your preparation smartly. To help you with that, we have provided below the information on JEE Advanced 2019 exam pattern. Go through the information provided below for exam pattern and start your preparation for the exam accordingly.
JEE Advanced Exam Pattern
Items  Particulars 
Number of Questions Papers  2 (Paper 1 & Paper 2) 
Number of Sections  3 (Physics, Chemistry, & Mathematics) 
Question Types  Objective Type 
Duration  3 Hours for Each Paper (Paper 1 and Paper 2) 
Marking Scheme  Negative Marking (different for both paper) 
Distribution of Marks and Questions (SubjectWise)
Paper 1
Sections  Number of Questions  Marks Per Question  Total Marks
 Negative Marking 
1  5  3  15  1 
2  8  4  32  2 
3  5  3  15  1 
Paper 2
NOTE: Distribution of marks and questions for all subjects – Physics, Chemistry, and Mathematics.
Sections  Number of Questions  Marks Per Question  Total Marks
 Negative Marking 
1  6  3  18  1 
2  8  4  32  2 
3  4  3  12  0 
JEE Advanced 2019 (Architecture Aptitude Test)
Candidates who clear the JEE Advanced exam can apply for the B.Arch. Programme. Candidates will need to visit the official website of the Joint Entrance Examination Advanced after the declaration of the result to apply for the B.Arch programme.
Architecture Aptitude Test is a single exam of 3 Hours duration. Candidates who qualify the exam successfully will be given ranks in the common JEE Advanced rank list. There will be no separate list of ranks will be published for the individual candidate.
Items  Particular 
Number of Sections  3 (Mathematics, Aptitude and Drawing) 
Type of Questions  Multiple Choice Question Type 
Number of Papers  1 
Duration  3 Hours 
Exam Mode  Pen and Paper based test 
Distribution or Questions and Marks
Subject Name  Number of Questions  Marks 
Mathematics  30  120 
Aptitude  50  200 
Drawing  2  70 
Best Books For JEE Advanced 2019 Preparation
While there are a lot of preparation books available for JEE Advanced, it is strongly recommended to first understand the concept of JEE Advanced syllabus from NCERT textbooks. This is important because NCERT books are considered as the base for building your JEE Advanced preparation.
So, make sure to first clear all the concepts from the NCERT books and then refer to other books. So, once you are done preparing from the NCERT Books, refer to the following books for JEE Advanced 2019 preparation: